Part Iv Step By Step Operation; The Front Panel - Vision Engraving & Routing Systems Express User Manual

Installation 43
4 Step by Step Operation
4.1

The Front Panel

The front panel of the engraver is shown below. In order to maintain simplicity of operation, the majority
of the machine's settings and controls are through the Vision software interface. The front panel has
buttons for Start, Pause and on top of the machine is the Emergency Stop button.
There are two green LED indicator lights on the front panel. The top indicator light will appear when the
machine's power switch (located on the power supply) is turned on. The second indicator light is above
the Start Button.
© 2015 Vision Engraving & Routing Systems