Vision Engraving & Routing Systems Express User Manual page 101

Step by Step Operation 101
In the Vision 9 software, we will now draw guidelines using the measurements we wrote down. To add a
guideline, click with the right mouse button anywhere within the plate area. The Edit Guides window will
appear. Select the horizontal guide icon in the upper left corner of this window and in the Y entry field,
type in your first Y number (for this example, 1.642 was entered as shown below). Click on Add, then
enter the second Y value you measured and click Add. Click on the vertical guide icon and add the X
values you measured.
Click on OK when finished. You should then have four guidelines as shown here (your item's engraving
area and locations will differ than those shown in this example).
© 2015 Vision Engraving & Routing Systems