Table of Contents
Advertisement
////////////////
To install the toner cartridge in the hopper, follow these steps:
1.
Toner Hopper
2. Using both hands, hold the toner cartridge
label-side
up and shake
it gently from side to side (not up and down) a few times.
3. Place the toner hopper in front of you so
that
its cavity is right-
side up and its metal rods are farthest from you.
4. Place the toner cartridge label-side up into the hopper. The clear
plastic tab taped to the top of the cartridge should be on the right
side when you set the cartridge in the hopper.
Hopper Cavity
5. While pressing down on the top of the cartridge, slide the two
green latches on the sides of the cartridge away from you
.
This
will lock the cartridge in place.
4
Advertisement
Table of Contents
