Drum Charger - Atari SLM804 Series Owner's Manual

For all atari st computers
Hide thumbs Also See for SLM804 Series:
Table of Contents

Advertisement

////////////////
6. Locate the drum control at the back of the
printer.
Set the drum
control to A, 8, or C according to the label on the right side of
the drum unit.
Drum Label
(A, 8,
or
C)
7. Reset the drum page counter, and close the printer's top cover.
Warning: If you fail to reset the drum page counter after replacing
the drum, the counter's new page count will not accurately report
when you should next replace the drum.
Drum Charger
To avoid confusion with the paper
charger,
the drum charger is
identified by a green dot. To replace the drum charger, follow
these steps:
1. Open the top cover without releasing the drum and toner hopper.
2. Remove the old drum charger. Slide the charger to the left
using its tab, and remove the charger from the printer.
38

Advertisement

Table of Contents
loading

Table of Contents