Table of Contents
Advertisement
12. Press the MENU key several times to return to main operational screen
13.
Your MPC VECTOR is now ready for use with lower voltage ratings of 200-208 or 318-400 VAC.
11. Motor Parameter Setup and Tuning
The MPC VECTOR controller must know several motor characteristics before the motor can be calibrated. This
calibration allows the controller to maintain precise control over the operation of the motor.
Note that the ranges listed in the table below reflect absolute min/max accepted by the drive and may not match a
specific application. These do not have to be set in any particular order but will be presented sequentially by the User
Interface. The parameters will need to be entered in each field if the MPC VECTOR controller was shipped without a
motor, or if the motor is changed to a different model than was originally supplied.
S
ETTING THESE PARAMETERS IMPROPERLY AND RUNNING THE AUTO
IN DRIVE ERRORS
Reference motor parameter table, next page
.
62
-
CALIBRATION ROUTINE CAN RESULT
Advertisement
Table of Contents
Troubleshooting
