Confirm Display And Keypad Functionality - Idex Pulsafeeder MPC Vector Installation, Operation & Maintenance Manual

Step 11 (Optional)

6.3 Confirm Display and Keypad Functionality

The example display messages are shown in English for demonstration purposes. If an alternate
language has been set, the text is displayed as a translation of the English version.
Now that you have confirmed that the MPC VECTOR is receiving power, it is necessary to confirm that the display
and keypad are functioning properly. On normal power-up, the following display sequence appears.
Upon power application the display will show all black squares (approx. 2 seconds). The next four screens show
communication initialization, firmware version, serial number, and part number. These parameters are generally
set at the factory. The firmware screen has the first four digits displayed as the software revision for the MPC
VECTOR control board, and the second four indicate the software revision for the remote board.
The revision numbers should be identical for both units. Unpredictable or unstable operation may
result with mismatched software revisions.
Analog Input #1 signal setup, test, and calibration
Figure 6-1 MPC VECTOR Display Power Up Sequence
29
Section 7.1
Analog Input Setup
Section 8.1.3
Analog Input
Calibration