Table of Contents
Advertisement
9. Flow Meter Input
The MPC VECTOR accepts flow meter process feedback from an analog (4-20mA) flow metering device. The
manufacturer of the flow meter is not important but the process signal must conform to a set of minimum
specifications in order to work with the MPC VECTOR. See section 13 Specifications
9.1 Flow Meter Installation and Activation
Prior to installation make sure your flow meter conforms to the MPC VECTOR's flow meter specifications (refer to
Specifications
Section 13
1. The system information is displayed, the starting display will be:
2.
Press the MENU key
3. Press the UP arrow key
4. Press the ENTER key
. Your flow meter must also be calibrated independently prior to installation.
Figure 9-1– Flow Meter Connection
S E T P T
F L O W
- M E N U -
C A L I B R A T I O N
- M E N U -
S Y S T E M S E T U P
X X . X X X
X X . X X X
59
Advertisement
Table of Contents
Troubleshooting
