Table of Contents
Advertisement
Modifying the Sampling Interval, when Flow Meter feedback is used
1. The starting display will be:
2. Press the MENU key.
3. Press the UP arrow key.
4. Press the ENTER key.
5. Press the DOWN key until you get to the PID screen.
6. Press the ENTER key.
7. Press the UP arrow key.
8. Press the ENTER key.
9. Press the UP and/or DOWN arrows to adjust the sampling period, t
seconds e.g., 1000 milliseconds = 1 second)
10. Press the ENTER key to accept the new sampling period
11. The new PID sampling period has been set.
S E T P T
X X . X X X
F L O W
X X . X X X
- M E N U -
C A L I B R A T I O N
- M E N U -
S Y S T E M S E T U P
S Y S T E M S E T U P
S T A T U S
S Y S T E M S E T U P
P I D P A R A M E T E R S
P I D P A R A M E T E R S
C O E F F I C I E N T S
P I D P A R A M E T E R S
S A M P L I N G P E R I O D
S A M P L I N G P E R I O D
P E R I O D :
S A M P L I N G P E R I O D
P E R I O D :
P I D P A R A M E T E R S
S A M P L I N G P E R I O D
58
X X X M S
. (Note: value is entered in milli-
s
X X X M S
Advertisement
Table of Contents
Troubleshooting
