Idex Pulsafeeder MPC Vector Installation, Operation & Maintenance Manual page 66

5. Press the DOWN key five (5) times
6. Press the ENTER key to enter the Flow Sensor setup menus.
7.
Press the ENTER key to see the current sensor configuration
8. Press the ENTER key to change the sensor type.
9. Press the UP arrow key until the analog flow meter option is displayed.
10. Press the ENTER key to accept the new configuration.
11. Press the MENU key several times to return to the Main screen.
12. Perform either a WET or DRY Pump Flow Calibration on your MPC VECTOR (see Section 8.1.2
Pump Flow Scaling and Calibration
13.
Your MPC VECTOR is now ready for use with your flow meter.
S Y S T E M S E T U P
S T A T U S
S Y S T E M S E T U P
F L O W M E T E R
F L O W M E T E R
M E T E R T Y P E
.
S E N S O R T Y P E
I N A C T I V E
S E N S O R T Y P E
< I N A C T I V E >
S E N S O R T Y P E
< A N A L O G >
S E N S O R T Y P E
A N A L O G
).
60
Closed Loop