Additional Steps - Kodak X-OMAT Multiloader 300 Installation Instructions Manual

II 3058-4

ADDITIONAL STEPS

A good contact between the MAGAZINE SUCKERS and the top FILM in the MAGAZINE must
be achieved. The FILM POCKET moves down the amount of additional steps after the top
FILM is reached.
•
1 increment = 0.09mm
•
Range 00h..1Eh
•
Default value 0Ah
NEARLY EMPTY
This PARAMETER is changed by the function NEARLY EMPTY. It is not possible to key in a
value.
TILT POSITION
To achieve good film separation in the MAGAZINE, the FILM POCKET has to move up a
certain amount of steps, after the fresh FILM is picked up, and the SUCKER BAR is then
tilted.
•
1 increment = 0.09mm
•
Range 00h..46h
•
Default value 14h
LOWER POCKET ST
The fresh FILM must be placed correctly in the CASSETTE. It might be possible that the
fresh FILM floats out of the CASSETTE tgrough the gap between BLOW PIPES and
CASSETTE. To avoid this, the PARAMETER LOWER POCKET has to be set to the correct
amount of steps.
•
1 increment = 0.09mm
•
Range. 00h..64h
PARAMETER DOUBLE SHEET DET
The DOUBLE SHEET DETECTOR of ML300s with SN > 3000 is able to discriminate between:
•
XML 300 SN < 3000
•
XML 300 SN > 3000
•
XML 300 Plus
KODAK AG Stuttgart
no FILM (The DOUBLE SHEET DETECTOR of ML300s with
SN < 3000 cannot do this)
1 FILM
more than 1 FILM
01h
00h
00h
11-3
INSTALLATION INSTRUCTIONS
8/1998