Kodak X-OMAT Multiloader 300 Installation Instructions Manual page 133

II 3058-4
8. Download the OPERATING SOFTWARE from DRIVE C: to the ML300.
Note
ALWAYS SELECT YOUR OWN LANGUAGE FIRST TO OVERWRITE THE DEFAULT LANGUAGES.
THE SELECTED LANGUAGES ARE MARKED WITH AN ASTERISK.
Select INSTALLATION from the MAIN MENU ...........................press ENTER
Select SOFTWARE UPDATE from the menu INSTALLATION ..press ENTER
Select the desired languages (up to 4) .................................press ENTER
Select SOFTWARE UPDATE ...........................................................press ENTER
Key in YES .......................................................................................press ENTER
The software of the SYSTEM UNIT is now updated. The amber and the red LED on the
OPERATOR DISPLAY are flashing alternately. After the software of the SYSTEM UNIT is
downloaded, the error code 00 00 00 00 00 is displayed and the green LED on PCB A1 is
switched on.
•
The software of the CASSETTE UNIT is now updated. The red LED on PCB A8 is flashing.
•
The software of the MAGAZINE UNIT is now updated. The red LED on PCB A4 is flashing.
•
The complete operating software is downloaded and the red LED on the OPERATOR
CONTROL PANEL is switched on.
9. Switch off the XML 300. Wait 5 seconds. Switch on the XML 300 again.
10. Exit the SOFTWARE UPDATE PROGRAM.
Press any key at the LAP TOP
Select RETURN from SOFTWARE UPDATE .................................press ENTER
11. Check if the PARAMETERS did not change.
Select CHANGE ML300 DATA from the MAIN MENU ...........press ENTER
Select CHANGE PARAMETERS ....................................................press ENTER
12. If one of the parameters with the suffix H has changed, alter it.
13. If one of the parameters with the suffix D has changed, start the corresponding function.
If not proceed with step 14.
PARAMETER
CASSETTE OFFSET
MAGAZINE LEVEL
MAGAZINE HOME POSITION
GEAR BACKLASH
NEARLY EMPTY
KODAK AG Stuttgart
INSTALLATION INSTRUCTIONS
CORRESPONDING FUNCTION
CASSETTE LENGTH
SCAN RUN
SCAN RUN
SCAN RUN
NEARLY EMPTY
13-17 8/1998