Installing The Chemicals - Kodak X-OMAT Multiloader 300 Installation Instructions Manual

II 3058-4
2. Remove the WING NUT.
3. Install:
•
DEVELOPER FILTER
•
WING NUT
•
DEVELOPER MANDREL
4. Check that the:
•
DEVELOPER MANDREL is seated correctly
•
MANDREL HOUSING is in the locked position

INSTALLING THE CHEMICALS

Important
The REPLENISHMENT PUMPS must be calibrated correctly to:
•
obtain the correct image quality and performance
•
save chemicals and money
1. Calibrate the REPLENISHMENT PUMPS. See Calibrating the Replenishment System
under the Basic Setup Options in the Operator Manual.
2. Drain the water from the TANKS.
3. Mix the chemicals and fill the processing TANKS.
KODAK AG Stuttgart
INSTALLATION INSTRUCTIONS
9-3 8/1998