Table of Contents
Advertisement
EDID Management
The Ultra HD 600 MHz 1:8 Splitter for HDMI w/ HDR features EDID Management.
The splitter can use either the downstream EDID (from the display/sink), the built-in internal
EDID, or a custom EDID setting. Additional EDID modes are available when controlling the
splitter using the Gefen Syner-G Software Suite. See
for more information.
To select between different EDID modes, press and release the recessed EDID button on
the front panel, using the end of a paper clip or other sharp object.
►
Internal (2-ch / Multi-Ch)
Use this EDID mode if problems are encountered when using the external EDID.
The built-in internal EDID provides the source device with a "generic" EDID which
can be used by all display (sink) devices. When the Internal EDID mode is being
used, the audio output format can be set to either 2-Ch or Multi-Ch. Additional
internal EDID modes are available using Syner-G. See
14)
for more information.
4
5
6
Outputs
Supported Audio Formats
LPCM 2-channel*
Dolby® Digital
Dolby® TrueHD
DTS-HD Master Audio™
* When set to Internal 2-ch, only LPCM is supported.
Out 3
Out 4
►
Ext
When set to Ext mode, EDID data will be fetched from each display (or other sink
device) that is connected to the outputs of the splitter. Once this information is
gathered, the splitter "builds" an EDID based on the highest video and audio formats
that are supported by all sink devices. This EDID is then transmitted to the source
device.
►
Cust
Use this EDID mode when using EDID functions within the Syner-G software
application. See
7
8
2-Ch
EDID
Out 5
Out 6
Setting the EDID Mode (page 14)
Setting the EDID Mode (page 14)
EDID Modes
Ultra HD 600 MHz 1:8 Splitter w/HDR
Multi-Ch
Internal
External
Custom
EDID button
LPCM 8-channel
Dolby® Digital Plus
DTS:X™
MLP (PPCM)
Out 7
page | 8
Setting the EDID Mode (page
USB
Power
Out 8
for more information.
5V DC
Advertisement
Table of Contents
