Connecting And Operating The Digital Audio Decoder For Hdmi - Gefen GTV-AUDDEC User Manual

CONNECTING AND OPERATING THE
DIGITAL AUDIO DECODER FOR HDMI
How to Connect the Digital Audio Decoder for HDMI
1. Connect an HDMI source device to the HDMI input port of the Digital Audio
Decoder for HDMI using the included HDMI cable.
2. Optionally, connect an additional audio source to the coaxial (S/PDIF) input
using a user supplied coaxial cable.
3. Connect the Digital Audio Decoder to an amplifier using the RCA connectors
on the rear panel. The following RCA connectors are available:
• Front Left
• Front Left (for bi-amping)
• Front RIght
• Front Right (for bi-amping)
• Center
• Left Surround
• Right Surround
• Subwoofer
4. Connect up to two HDMI output devices to the HDMI outputs using user
supplied HDMI cables. If only using a single HDMI device, connect this
device to the HDMI Output 1 port. These outputs will be mirrored.
5. Optionally, audio can also be output using the coaxial (S/PDIF) and optical
(TOSLINK) connectors. These outputs will not have any processing applied
to them.
6. Connect the included 24V DC power supply to the power receptacle on the
Digital Audio Decoder for HDMI. Connect the wall plug into an empty wall
power socket.
Hi-Def Source
Audio Receiver
SL
Subwoofer
®
GTV Audio Decoder
SR
R
C
L
(8) ANALOG AUDIO CABLES
DIGITAL AUDIO (COAX ) CABLE
DIGITAL AUDIO (OPTICAL) CABLE
RS-232 Controller
HD Display
HD Display
7
HDMI CABLE
GTV-AUDDEC