Table of Contents
Advertisement
Getting Started
Installation
Connecting the HDMI to Composite / S-Video Scaler
1.
Connect the included HDMI cable from the Hi-Def source to the HDMI connector of
the HDMI to Composite / S-Video Scaler.
2.
Connect a Composite cable (RCA-type) between the HDMI to Composite / S-Video
Scaler and the Composite input on the display or A/V receiver. Optionally connect an
S-Video cable from the HDMI to Composite / S-Video Scaler to the display or an A/V
receiver. Both the Composite and S-Video outputs are active at all times.
3.
Connect two RCA-type cables (usually part of the Composite cable) between the
L and R connectors on the HDMI to Composite / S-Video Scaler and the L and R
connectors on the display or A/V receiver.
4.
Connect the included 5V DC power supply to the power receptacle on the HDMI to
Composite / S-Video Scaler and connect the power cord to an available electrical
outlet.
Sample Wiring Diagram
®
Hi-Def Source
Scaler
Audio Receiver
page | 4
HDMI CABLE
S-VIDEO CABLE
COMPOSITE VIDEO CABLE
COAX AUDIO CABLE
L/R RCA AUDIO CABLE
Display
GTV-HDMI-2-COMPSVIDSN
X
Advertisement
Table of Contents
