Printing Area; Head Height Adjustment; When Setting The Head Height To High - MUTOH ValueJet VJ-1628TD Operation Manual

VJ-1628TD, VJ-2628TD OPERATION MANUAL
4.2.4

Printing area

The printable area of this printer is as follows.
d
Printable Area
Cut sheet meida
a=5mm
b=10mm~25mm
c=35mm
d=10mm~25mm
4.2.5

Head height adjustment

Printing with high printing rate or using strongly-curved media can cause print heads to rub.
Changing the distance from the print head surface to media (head height) may allow you to avoid head
rub.
Head height can be changed to three levels.
Follow the procedure below to change the head height.
4.2.5.1

When setting the head height to High

NOTE
• If the head height adjustment lever is changed, high print quality is not guaranteed.
• Do not open the front cover or change the head height during printing.
If the head height is changed, the alignment will be changed and high print quality will not be
guaranteed.
c
b
a
Printable Area
d
a=5mm
b=10mm~25mm
c=5mm (105mm at media end)
d=10mm~25mm
4-5
4 Handling the printer
a
c
b
a
Roll media