About Page - Standard Horizon CP500 Owner's Manual

Hide thumbs Also See for CP500:
Table of Contents

Advertisement

DISPLAY COLOR
SHIP ICON
CURSOR SPEED
MEASURE DISTANCE
WINDOWS SETUP
LANGUAGE
AUTO INFO
CURSOR WINDOW
CURSOR POSITION
COG TIME LINE
3.9

ABOUT PAGE

From Main Menu page it is possible to select an Information page containing Software,
Chart and Optional devices information.
1
Software System Information
2 Cartography Information
3 Storage Capacity
1. Press [MENU]. Move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].
2. Move the ShuttlePoint knob to highlight About... and press [ENT] or move the
ShuttlePoint knob to the right.
3. The Information page appears on the screen (see the previous Figure).
4. Press [CLR] or move the ShuttlePoint knob to the left to exit and show the Chart page.
CP500
Changes the background colors of the chart page to enhance the visibility of the screen
depending on the surrounding light conditions. Selections are Normal (is recommended
when the GPS Chart Plotter is not exposed to the direct sunlight. When this mode is set
the maps are displayed in order to use colors as similar as possible to ones used in the
original paper charts), Classic (uses vivid chart colors presentation), NOAA (allows
setting NOAA paper chart colors presentation), Night is recommended when the
environment is dark in order to reduce the glare of the display. The GPS Chart Plotter
displays maps and screen in darker colors) and Sunlight (is designed to enhance the
visibility of the screen when the GPS Chart Plotter is exposed to sunlight. The maps are
much brighter than in the other modes and the depth areas are filled with the white color
so different depth areas are not easily distinguishable).
Allows selection of one of 5 choices of ship icons that represent your vessels position
shown on the chart page.
Selects the preferred speed among Low, Medium and High for the cursor in the Chart page
and within the menu.
When this function is turned on allows a distance to be measured between two points
using the ShuttlePoint knob and [ENT].
This menu selection allows the data windows to be customized on the Chart and
Navigation pages.
Allows changing the language for menus and data screens.
By default when the cursor is moved over a buoy, Mark or other item a popup window will
show information of the item. This menu item allows the window to be turned On or Off.
By default when the cursor is moved a window is shown with the lat/lon Distance and
bearing from the vessels location to the cursor. This selection allows the window to be
turned Off.
The position of the cursor (vessels location) can be customized so it centered in the middle
or centered on the bottom of the chart page.
Is a line projected from the vessel icon which indicates the distance your vessel will travel
at the current speed. Selections are 2, 10, 30 minutes, 1, 2 hours and Infinite.
Figure 3.9 - Example of Information page
XXXXXX
YY.YY
: M-NA-M632.00 LOS ANGELES and SAN PEDRO BAYS
R
1
2
3
Page 31

Advertisement

Table of Contents
loading

Table of Contents