Security; User Password - Unify OpenScape Desk Phone CP400 User Manual

110
Settings
$ User settings -
if nec.
$

Security

-
Change user password -
Current password K
©
******
Q
Security

User password

Your User password protects your individual configurations, including your lan-
guage settings. You can also use the User password to lock your telephone
page 112.

The administrator may have configured the following settings:
• The password is deactivated: You do not have the option of configuring user
settings. The message "Password is disabled" is displayed.
• The password is temporarily locked: You do not have the option of configuring
user settings at this time. The message "Password is suspended" is displayed.
• After initially logging on to a user area, you may have to replace the default
password with a new password.
• A password can have a predefined period of validity: You will have to create a
new password when the period ends. The message "Change password (x
days left)" will alert you to this at the appropriate time. The message "Pass-
word has expired" appears when the validity period is over. Confirm "Passwort
ändern" and change the password as described in this section.
• If you repeatedly enter the wrong password (2 to 5 times), additional attempts
are blocked. You can make another attempt after a predefined time.
• It is possible that you will not be able to re-use a previously used password for
a period of time, which means you have to create another "new password".
• Your administrator can tell you about the rules for what and how many charac-
ters can or must be used in the password.
The preset password "000000" corresponds to a blank password. In other
words, the phone cannot be locked and the user menu is not password
protected (see also
z
You can also configure this setting via the web interface
@
Press the key shown if appropriate.
Open using the Softkey.
_
_ Open using the Softkey.
j
Enter and confirm the User password.
€
Select the "Security" function.
Open using the Softkey.
_
Open using the Softkey.
_
Open using the Softkey.
_
The input field is displayed.
_
j
Enter the current password and conclude your input with the Softkey.
page 111).

page 172.
