Instrument Panel And Indicator Lights; Control Symbols - Komatsu 930E-2 Shop Manual

INSTRUMENT PANEL AND INDICATOR LIGHTS

CONTROL SYMBOLS

Many control functions are identified with "International" symbols that the operator should learn to recognize
immediately. The operator must understand the function and operation of each instrument and control. This
knowledge is essential for proper and safe operation of the machine.
The following symbols are general indicators and may appear in multiple locations and combinations on the instrument
panel.
This symbol may be used alone or
with another symbol. This symbol
identifies the "Off" position of a
switch or control.
This symbol may be used alone or
with another symbol. This symbol
identifies the "On" position of a
switch or control.
This symbol identifies the "Pushed-
In" position of a push-pull switch or
control.
This symbol identifies the "Pulled-
Out" position of a push-pull switch
or control.
N05044
INSTRUMENT PANEL (Figure 5-5)
The operator must understand the function and opera-
tion of each instrument and control. Control functions
are identified with "International" symbols that the
operator should learn to recognize immediately. This
knowledge is essential for proper and safe operation.
Items that are marked OPTIONAL do not apply to
every truck.
Operator Cab Controls
This symbol when it appears on an
indicator or control identifies that
this indicator or control is NOT
used.
This symbol identifies a rotary con-
trol or switch. Rotate the knob
clockwise or counterclockwise for
functions.
This symbol identifies a switch
used to test or check a function.
Press the switch on the side near
the symbol to perform the test.
N5-11