Final Gear Ratio Selection - Komatsu 930E-2 Shop Manual

FINAL GEAR RATIO SELECTION

For an 830E truck, the proper gear ratio has to be
selected.
1. Press and hold the MODE and LIGHT/INC
switches until "CHEC" is displayed.
2. Press and hold the TOTAL/SFT and LIGHT/INC
switches until "S.SEL"
is displayed.
3. Press the CAL/CLR switch repeatedly
until "A.XX" is displayed, where
"XX" is one of the following:
"XX" Gear Ratio
00 31.875
01 36.400
02 28.125
03 26.625
NOTE: The Payload Meter is originally set to "00".
4. Press the TOTAL/SFT switch and "XX" will flash.
5. Press theLIGHT/INC switch to select the desired
gear ratio.
6. Press the MODE switch
and "CHEC" will be displayed.
7. Press the MODE switch and the meter will return
to normal operation.
M20-24
Remarks
Original
High Traction
Standard
High Speed
Payload Meter II M20007 10/00