17. Follow procedures in "Floating Ring Seal Assem-
bly/Installation" to install seal assembly in cavities
in the back plate and seal carrier.
1. Cooling Oil Port
2. Brake Apply Pressure ports
3. Piston Housing
4. Shipping Bar
1. Damper
2. Friction Disc
J05018 03/01
FIGURE 5-9. INNER GEAR INSTALLATION
5. Inner Gear
6. Drain Plug
7. Capscrew & Washer
8. Capscrew and Washer
FIGURE 5-10. DISC PACK INSTALLATION
3. Separator Plate
4. Piston Housing
Disc Brake Assembly
18. Install seal carrier on back plate. Secure in place
with six 1/2 UNC x .75 in. socket head capscrews
to retain seal carrier in position until brake assem-
bly is installed on the truck.
9. Spacer
10. Wear Indicator Installation Port
11. Ring Gear
5. Piston
J5-9