Instrument Panel And Indicator Lights; Control Symbols; Instrument Panel (Figure 3-6) - Komatsu 730E Operation & Maintenance Manual

OM3035.3 02/03
Instrument Panel & Indicator Lights

INSTRUMENT PANEL AND INDICATOR LIGHTS

CONTROL SYMBOLS

Many control functions are identified with "International" symbols that the operator should learn to recognize imme-
diately. The operator must understand the function and operation of each instrument and control. This knowledge
is essential for proper and safe operation of the machine.
The following symbols are general indicators and may appear in multiple locations and combinations on the instru-
ment panel.
This symbol may be used alone
or with another symbol. This
symbol identifies the "Off" posi-
tion of a switch or control.
This symbol may be used alone
or with another symbol. This sym-
bol identifies the "On" position of
a switch or control.
This
"Pushed-In" position of a push-
pull switch or control.
This symbol identifies the "Pulled-
Out" position of a push-pull switch
or control.
The operator must understand the function and oper-
ation of each instrument and control. Control func-
tions are identified with "International" symbols that
the operator should learn to recognize immediately.
This knowledge is essential for proper and safe oper-
ation.
symbol identifies the

INSTRUMENT PANEL (Figure 3-6)

This symbol when it appears on
an indicator or control identifies
that this indicator or control is
NOT used.
This symbol identifies a rotary
control or switch. Rotate the knob
clockwise or counterclockwise for
functions.
This symbol identifies a switch
used to test or check a function.
Press the switch on the side near
the symbol to perform the test.
Items that are marked OPTIONAL do not apply to
every truck.
Operation - Section 3
Page 3-23