STEERING CYLINDERS
Figure 6-10 illustrates details of the steering cylinder
mounting. Refer to Section "G" for removal and instal-
lation instructions.
1. Steering Cylinder
2. Tie Rod
3. Capscrew
4. Locknut
5. Bearing Retainer
L6-10
FIGURE 6-10. STEERING CYLINDER MOUNTING
6. Capscrew
7. Lockwashers
8. Retainer
9. Mount Bracket (Frame)
10. Bearing Spacer
Steering Circuit Component Repair
Relieve pressure before disconnecting hydraulic
and other lines. Tighten all connections before
applying pressure.
Hydraulic fluid escaping under pressure can have
sufficient force to enter a person's body by pene-
trating the skin and cause serious injury and pos-
sibly death if proper medical treatment by a
physician familiar with this injury is not received
immediately.
11. Bearing
12. Pin
13. Hardened Washer
L06021