Table of Contents
Advertisement
OM3245 8/11
INSTRUMENT PANEL
The operator must understand the function and operation of each instrument and control. Control functions are
identified with international symbols that the operator should learn to recognize immediately. This knowledge is
essential for proper and safe operation.
Items that are marked "optional" do not apply to every truck.
Control Symbols
Many control functions are identified with international symbols that the operator should learn to recognize immedi-
ately. The operator must understand the function and operation of each instrument and control. This knowledge is
essential for proper and safe operation of the machine.
The following symbols are general indicators and may appear in multiple locations and combinations on the instru-
ment panel.
This symbol may be used alone
or with another symbol. This
symbol
position of a switch or control.
This symbol may be used alone
or with another symbol. This
symbol identifies the ON position
of a switch or control.
This
"Pushed-In" position of a push-
pull switch or control.
This
"Pulled-Out" position of a push-
pull switch or control.
identifies
the
OFF
symbol
identifies
the
symbol
identifies
the
Operator Cab And Controls - Section 32
This symbol when it appears on
an indicator or control identifies
that this indicator or control is
NOT used.
This symbol identifies a rotary
control or switch. Rotate the knob
clockwise or counterclockwise for
functions.
This symbol identifies a switch
used to test or check a function.
Press the switch on the side near
the symbol to perform the test.
Page 32-13
Advertisement
Table of Contents
Troubleshooting
