Remove And Replace Fuses - Thermo Scientific GENESYS 20 Service Manual

Routine Maintenance
5. Use the screwdriver to
remove the fuse holder to
access the fuses as shown in
Figure 5.3.
6. Unsnap both fuses to
remove them (refer to Figure
5.3, [Item #1]).
7. Insert the new fuses, pushing
them in so they snap into
place.
8. Replace the fuse cover.
9. Replace the power cord.
10. Plug the instrument back
into the appropriate wall outlet and turn on the power.
5 - 5
Figure 5.3

Remove and Replace Fuses