Drawings And Schematics; Mechanical Assemblies - Thermo Scientific GENESYS 20 Service Manual

12.1
Mechanical
Assemblies
This section provides interconnect, assembly, schematic drawings and
parts lists for the mechanical, electrical, and cable assemblies of the
GENESYS 20 Spectrophotometer.
All the mechanical assemblies are on different sheets of Thermo
Spectronic Drawing Number 4001-200 — "Main Assembly." (Refer
to the Sht# Column below)
FIG. ASSEMBLY DESCRIPTION
12-1 Lamp Socket Assembly
12-2 Filter Motor Assembly
12-3 Grating Motor Assembly
12-4 Fan Assembly
12-5 Mono Motor Power Cable Assembly
12-6 Mono Motor Control Cable Assembly
12-7 Detector Cable Assembly
12-8 Power Supply Cable Assembly
12-9 Limit Switch Cable Assembly
12-10 Power Entry Cable Assembly
12-11 Filter Assembly
12-12 Filter and Lens Assembly
12-13 Turning Mirror Assembly
12-14 Grating and Mount Assembly
12-15 Cuvette Adapter Assembly
12-16 Lamp Knob Assembly
12-17 Entrance Slit/Illumination Assembly
12-18 Display Assembly
12-19 Detector Assembly
12-20 Main Cover Assembly
12-21 Lamp Door Assembly
12-22 Main Board
12-23 Mono Motor Board
12-24 Base Assembly
12-25 Main Assembly
12-26 Interface Cable - IBM PC/XT
12 - 1

Drawings and Schematics

NOTE
PART NO.
4001-250
3360014-671
4001-251
4001-252
4001-253
4001-254
4001-255
4001-256
4001-261
4001-262
4001-263
4001-264
4001-265
4001-266
4010-000
4001-267
4001-268
4001-269
4001-270
4001-271
4001-272
4001-6046
4001-6056
4001-200
4001-200
336041-000
Section 12
REV. SHT#
E 3
E 3
E 3
E 3
E 3
E 3
E 3
E 3
E 3
E 3
E 4
E 4
E 4
E 4
E 5
E 5
E 5
E 5
E 5
D 6
D 6
K 7
K 7
C 7
C 8
A 1