Using Record-A-Call - Inter-Tel 8664 User Manual

U R
SING ECORD
NOTE:
This feature is not supported on peer-to-peer (P2P) calls. Ask your system
administrator if your endpoint is configured to use P2P audio.
If your telephone system is equipped with a Voice Processor (voice mail), you may
have access to the Record-A-Call feature. If so, you can record an ongoing call as a
mailbox message. You can then retrieve the message, just as you would any other
mailbox message.
NOTE:
The Record-A-Call feature remains active after the other party hangs up. This
allows you to append the recorded call with your own message.
To use the Record-A-Call feature while on a call:
EITHER, Press
1.
OR, Press
Dial
2.
If required, dial the desired mailbox number. (Your endpoint may be pro-
3.
grammed to select the mailbox, or you may be required to dial it.)
You hear a confirmation tone when the Record-A-Call feature is activated.
To turn off Record-A-Call:
EITHER, Press the
OR, Press
®
Inter-Tel Model 8664/8665/8668 User Guide
-A-C
ALL
.
-
7
FCN
until the softkey is available and then press the
Feat
FCN
.
3 8 5
softkey and then dial
Feat
.
.
3 8 5
softkey.
Feat
71