Parameters
Start Timer
Short Timer
Long Timer
Ring Tone Duration
Busy Tone Duration
Howler Tone Duration
RingBack Tone Duration
Ringing Pattern Settings
International Call Setting
4.3 Security
Select the menu bar of the "Firewall Settings->White List"; you can set the IP whitelist. It is
disabled by default.
SIP blacklist and whitelist function is to limit the number of SIP callouts.
When enabling and setting the whitelist IP address and then saving it, IP addresses
that are not configured in the whitelist will be denied access to VGW Web.
Through the menu bar of the "Firewall Settings->Port Settings", it will be
able to set the device's local maintenance port. It includes Web, and SSH
access port.
4-/8-Port SIP Internet Telephony Gateway
Its default value is 16 sec
Its default value is 4 sec
Its default value is 16 sec
Its default value is 60 sec
Its default value is 16 sec
Its default value is 16 sec
Its default value is 40 sec
The ringing sequence (interval): External Group Ringing and
Internal Group Ringing; External Group Ringing function is
used by default.
International outgoing call restrictions.
Figure 4-3-1 IP white list settings
Page 33
VGW-x10 Series
Illustration