Planet VGW 10 Series User Manual page 28

Parameters
In fact, it's the phone number of user (port).
Username
Password SIP user password -- It is necessary when user registers to softswitch.
Auth. Name SIP user name -- It is necessary when user registers to softswitch.
In a single device or group of device in a cascade, without network, all users
Internal No.
can make internal call to each other with internal number.
VGW supports both FSK and DTMF formats:


Caller ID


Lock Disable user port.
2） Voice advanced settings
Select "Port Settings->Voice And Fax Settings" from the navigation menu.
Parameters
Select Port
Silence Compression
Echo Cancellation
4-/8-Port SIP Internet Telephony Gateway
FSK: first ring and then have Caller ID.
FSK1: first Caller ID and then start ringing.
DTMF: first ring and then have Caller ID.
DTMF1: first Caller ID and then start ringing.
Figure 4-2-3 Voice settings
Select one or all ports to configure.
Identify and eliminate the long silent period from RTP, in order to save
network resources.
The parameter sets the ITU-T coding standard of the voice. The coding
technologies supported by this device are G.711 A law, G.711 U law,
G.723.1 and G.729 A and so on. Users can choose one or several coding
Page 23
VGW-x10 Series
Illustration
Illustration