Sip Services Basic Configuration - Planet VGW 10 Series User Manual

4.2.3 SIP services basic configuration

Select from the menu bar "SIP Settings -> Basic Settings" . You can set the VGW's SIP
server.
Figure 4-2-5 SIP Public parameter / SIP Local settings
Parameters
SRV Mode
SRV Domain
Primary Server Domain
Primary Server IP
Primary Server Port
Backup Server
Backup Server Domain
Backup Server IP
Backup Server Port
Local Domain
Local SIP Port
Registration Interval
Local Domain is generally the same as register server or leave this field blank.
4-/8-Port SIP Internet Telephony Gateway
SRV Mode has to be enable when DNS server is SRV.
SRV Domain has to be input when DNS server is SRV, and SRV
Domain is named with a prefix of _sip_udp.
The domain address of primary soft switch.
The IP address of primary soft switch.
The port number of primary soft switch that is used for SIP signal.
It is disabled by default.
When it fails to register the primary server, register the secondary
softs switch.
The IP address of secondary softs switch.
Port number of secondary softs switch.
Local Domain is necessary if SRV Mode is Enable.
Port number of device used for SIP signal.
How long will VoIP gateway send register message to soft switch
again.
Page 25
VGW-x10 Series
Illustration