Serial Port Login - Planet VGW 10 Series User Manual

2) Input correct user name and password to enter, the system default username is "admin", the
default password is "psw.iad".

6.1. 2 Serial port login

VGW can be used to configure the device via CONSOLE port. Use one end of the serial
cable to the VGW's CONSOLE port, and the other end connected to any serial port on computer.
Then operator computer will do as follows: (Open a windows "start" menu by doing the following:
"start->All Programs->Accessories->Communications->HyperTerminal"), and then click "Hyper
Terminal. exe". If you can't find out the application, please install application from the PC's
"control panel". With other help, please refer to Windows help.
1) Start HyperTerminal; there will be a "Connection Description" dialog box, required to enter a
name and select an icon for the connection as shown below:
4-/8-Port SIP Internet Telephony Gateway
Figure 6-1-2 VGW Telnet login
Figure 6-1-3 VGW Telnet login
Page 47
VGW-x10 Series