Cli Instruction Use - Planet VGW 10 Series User Manual

5) According to information on command screen, input correct login user name and password,
then you can log in.
If this is your first time to log in, please use the default account. System default username is
"admin", default password is "psw.iad". For details on the command, please refer to the
instructions on the back.
VGW CLI command maintenance tools, in addition to supporting Serial, also
support SHH. As SHH function usage is similar to Serial, do not repeat here.

6.1.3 CLI instruction use

1) Instruction
Instruction function
Reboot device
Load default settings
Username unlock
System upgrade
Debug open
Debug close
2) Instruction examples
Instruction function
Reboot device
Load default settings
Username unlock
System upgrade
Debug open
Debug close
4-/8-Port SIP Internet Telephony Gateway
CLI instruction
reboot
load df1
user unlock " username "
download program tftp " server IP " upgrade
filename "
debug call debug " level "
debug start
Ctrl-C to quit
#reboot<CR>
#system<CR>
#system> load df1<CR>
#system<CR>
#system> user unlock admin<CR>
#system<CR>
#system> download program 192.168.3.30
VGW-x10FSL.img<CR>
#system<CR>
#system> debug call 3<CR>
#system> debug start<CR>
Keyboard enter " Ctrl + C " to quit
Page 49
Instruction examples
VGW-x10 Series
Application
Serial/Telnet
Serial/Telnet
Serial
Serial/Telnet
Serial/Telnet
Serial/Telnet