Sip Advanced Settings - Planet VGW 10 Series User Manual

4.2.4 SIP advanced settings

Parameters
NAT STUN
NAT Keepalive Interval
Heartbeat Switch
Heartbeat Interval
Heartbeat Threshold
Register Switch Mode
Register Flow Limit
Switch To Back up SBC
Switch Back To Primary SBC
4-/8-Port SIP Internet Telephony Gateway
Figure 4-2-6 SIP Advanced settings
It is disabled by default.
The valid range of parameters is 0-999999.
Heartbeat parameters is sent to soft switch or not. It is
disabled by default.
How long will VOIP Gateway send heartbeat parameters to
soft switch again. The valid range of parameters is 0-999999.
The valid range of parameters is 1-255.
This option is used for switching between primary and second
server.
There are Register mode and Option mode. By default,
Register mode is effective.
To limit the number of register packets. By default, only 20
register packets can be sent per second.
The valid range is 1-100.
It is enabled by default.
It is enabled by default.
Page 26
VGW-x10 Series
Illustration