Point To Point Function - Planet VGW 10 Series User Manual

5.1.5 Point to Point function

VGW's P to P function that makes business between two VGW's without an SIP server
comes true. If the VGW can allocate a unique IP, a remote call is allowed between two VGW's via
Internet.
VGW-810FS
A IP：192.168.3.8
VGW-810FS
B IP：192.168.3.9
Follow the steps：
1) Go to the "4.2.6 Call routing" setting page, in "Dial Route IP" and "Route Port" input
opposite VGW's IP address and port number. Like "Figure 4-2.6: Digit Map", "dial
routing", device B inputs device A's IP and port number, on the other hand, device A
inputs device B's IP and port number.
2) Select "Device Status->Ports Status" menu by navigation, where the registration status
could be inquired. When all ports are successfully registered, we could see "registered"
displayed on the Web page. It is showed that we could make VGW's P to P business.
4-/8-Port SIP Internet Telephony Gateway
Phone A
Username(Phone number):88880001
Username(Phone number):99990001
Phone B
Figure 5-1-6 Point to Point function
Page 44
VGW-x10 Series