SpectraLink NetLink e340 Configuration And Administration Manual page 53

SpectraLink Corporation
Message Description
Bad Program File Handset software download files are
incorrect or corrupted
(battery icon), Low battery
Battery Low,
beep (audio)
Battery Failure The Battery Pack is not functioning.
Battery Failed Battery Pack is damaged or incompatible
with handset.
Can't Renew DHCP y...y = DHCP server IP address
yyy.yyy.yyy.yyy DHCP server is not responding to initial
renewal attempt
Charging ... The handset is charging in the Desktop
Charger.
Charge Complete The handset is now fully charged.
Checking Code Handset is contacting the TFTP Server to
determine if it has a newer version of
software that should be downloaded.
Checking DHCP IP The handset is retrieving DHCP information
from the DHCP server
CRC Code Error The software which has been TFTP
downloaded has a bad redundancy code
check
Code Mismatch! The software loaded into the handset is
incorrect for this model handset
PN: 72-1084-02-E.doc
Configuration and Administration—NetLink e340/i640 Wireless Telephone
Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation
Action
Download new software from the
SpectraLink site per
Maintenance
In call: the battery icon displays and a soft
beep will be heard when the user is on the
handset and the battery charge is low. User
has 15–30 minutes of battery life left.
The Battery Pack can be changed while the
call is still in progress. Do not press End
Call. Place call on Hold or Park. Quickly
remove the discharged battery and replace
with a charged battery, power on the
handset, and press Start Call to resume
the call in progress.
Not in call: The battery icon displays
whenever the battery charge is low The
message Battery Low and a beep indicate
a critically low battery charge when user is
not on the handset. The handset will not
work until the Battery Pack is charged.
Replace the Battery Pack with a new or
confirmed SpectraLink Battery Pack. Any
non-Spectra-Link Battery Packs will not
work.
Replace the Battery Pack with a new or
confirmed SpectraLink Battery pack. Any
non-SpectraLink Battery Packs will not
work.
Configuration problem. Check the IP
address configuration in the DHCP server.
No action needed.
No action needed.
None, this message should only last for
approximately one second. If message
remains displayed, power off and contact
customer support for a replacement
phone.
None. This is informational only.
Try the download again; it is possible the
software was corrupted during download. If
the error repeats, check that the download
image on the TFTP server is not corrupted.
Verify the License Management value is
correct. Replace the software image on the
TFTP server with software that is correct for
the handset model.
Software
.
Page 53