SpectraLink NetLink e340 Configuration And Administration Manual page 29
How to configure and maintain the spectralink wireless telephone within the mitel networks 3300 and sx-200 integrated communications platform (icp)
Hide thumbs
Also See for NetLink e340:
- Configuration and administration manual (64 pages) ,
- User manual (52 pages) ,
- Setup and administration manual (47 pages)
Table of Contents
Advertisement
SpectraLink Corporation
System Info
: Displays the IP address currently assigned to the handset.
Phone IP Addr
: Displays the IP address of the NetLink SVP Server and the OAI
Server IP Addr
Server (if installed).
Firmware Version
address is the hardware identification number and is set at the factory. Three code
numbers correspond to the three files that each version uses.
: permits an alphanumeric entry that will appear on the standby display
Identification
under the extension number. Use the alphanumeric entry technique described in the
Admin menu section and enter up to 16 characters.
:
Mitel Options
handset.
PN: 72-1084-02-E.doc
Configuration and Administration—NetLink e340/i640 Wireless Telephone
Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation
: displays the software version running the handset. The MAC
(MAC address)
(downloader code) (functional code)
(phintl file)
OK
Downloader: pd11gl3.bin
Functional: pd11mtd3.bin
Phintl: pi110001.bin
This option displays the ports being utilized for receiving data at the
Up
Page 29
Advertisement
Table of Contents
Need help?
Do you have a question about the NetLink e340 and is the answer not in the manual?
Questions and answers