Testing A Handset - SpectraLink NetLink e340 Configuration And Administration Manual

SpectraLink Corporation
8.

Testing a Handset

Verify proper registration and operation of each handset by performing the
following tests on each handset in an active wireless area.
1. Power on the handset by pressing
displayed as the handset acquires the system. The handset should display the user
extension or dashes if no extension is programmed. Any error messages should
clear.
2. Press the
Start Call
from the supported Mitel Networks VoIP solution and you should hear dial
tone. Place a call and listen to the audio quality. End the call by pressing the
key.
Call
3. Place a call to the handset and verify ring, answer, clear transmit, and clear
receive audio.
4. Go off-hook and use the
5. Go off-hook and use the
list.
6. Press the
End Call
number display will return.
PN: 72-1084-02-E.doc
Configuration and Administration—NetLink e340/i640 Wireless Telephone
Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation
Power On
key. The extension number should be replaced by information
key to verify the Features list.
FCN
key to verify the Line appearances / Line features
LINE
key. Any line indicators should turn off and the extension
. You will see a series of messages
End
Page 40