D: References - YASKAWA A1000 Series Quick Start Manual

<4> Default setting is dependent on the control mode (A1-02), the drive model (o2-04), and the Drive Duty (C6-01).
<13> Default setting value is dependent on the carrier frequency selection (C6-02).

◆ d: References

Reference parameters are used to set the various frequency reference values during operation.
■ d1: Frequency Reference
No. Name
d1-01
Frequency Reference 1
d1-02
Frequency Reference 2
d1-03
Frequency Reference 3
d1-04
Frequency Reference 4
d1-05
Frequency Reference 5
d1-06
Frequency Reference 6
d1-07
Frequency Reference 7
d1-08
Frequency Reference 8
d1-09
Frequency Reference 9
d1-10
Frequency Reference 10
d1-11
Frequency Reference 11
d1-12
Frequency Reference 12
d1-13
Frequency Reference 13
d1-14
Frequency Reference 14
d1-15
Frequency Reference 15
d1-16
Frequency Reference 16
d1-17
Jog Frequency Reference
<20> Range upper limit is determined by the maximum output frequency (E1-04) and the upper limit of the frequency reference (d2-01).
<26> The setting range is 0.0 to 66.0 in AOLV/PM.
YASKAWA ELECTRIC TOEP C710616 21C YASKAWA AC Drive - A1000 Quick Start Guide
Sets the frequency reference for the drive. Setting units are determined by
parameter o1-03.
Sets the jog frequency reference. Setting units are determined by parameter o1-
03.
Description
B Parameter List
Setting
Default: 0.00 Hz
Min: 0.00 Hz
Max: 400.00 Hz
<20> <26>
Default: 6.00 Hz
Min: 0.00 Hz
Max: 400.00 Hz
<20> <26>
B
141