Tektronix AWG5200 Series Technical Reference page 49

AWG5200 Series Technical Reference
5. Create three test waveforms from the generator using the Basic Waveform
plug-in.
a. Click the Waveform Plug-in tab on the display.
b. Select Basic Waveform from the Plug-in drop down list.
c. Click the Reset Plug-in button.
d. Set the Function to Sine.
e. Set the Frequency to 1 GHz.
NOTE.
Leave all other settings at their default settings.
f. Click the Compile Settings icon to open the compile settings dialog screen.
g. In the Name field, change the name to Waveform_1 GHz.
h. Close the compile settings dialog screen.
i. Click Compile.
j. Set the Frequency to 3 GHz.
k. Click the Compile Settings icon to open the compile settings dialog screen.
l. In the Name field, change the name to Waveform_3 GHz.
m. Close the compile settings dialog screen.
n. Click Compile.
Brief procedures
37