Tektronix AWG5200 Series Technical Reference page 22

Specifications
Table 7: Signal output characteristics (cont.)
Characteristics
Harmonic distortion
Output path
DC High BW
AC Direct
AC Amplified
(Option AC)
ENOB
SFDR
Operating at 2.5 GS/s
Operating at 5 GS/s
Operating at 10 GS/s
Phase noise
Operating at 2.5 GS/s
Operating at 5 GS/s or
10 GS/s with DDR enabled
10
Description
(See Table 8 on page 11.)
(See Table 9 on page 12.)
(See Table 10 on page 12.)
SFDR is the difference in dB between a CW carrier signal and the largest spur, excluding
harmonics, within a defined frequency range around the carrier. Measured with a balun and
with output amplitude set to 500 mV.
(See Table 11 on page 12.)
(See Table 12 on page 13.)
(See Table 13 on page 13.)
(See Table 14 on page 14.)
(See Table 15 on page 14.)
AWG5200 Series Technical Reference