Tektronix AWG5200 Series Technical Reference page 20

Specifications
Table 7: Signal output characteristics (cont.)
Characteristics
DC Offset accuracy
Output path
DC High BW
Common mode
(Warranted)
Differential mode
DC High Volt
(Option HV)
Common mode
(warranted)
Differential mode
AC output DC bias range
Output path
AC Direct
AC Amplified
(Option AC)
AC DC bias resistance
Output path
AC Direct
AC Amplified
(Option AC)
AC DC bias accuracy
(warranted)
Output path
AC Direct
AC Amplified
(Option AC)
8
Description
Differential offset is sensitive to output amplitude setting.
Within ±5 °C of internal self calibration temperature.
Common mode = ((OutP + OutN)/2).
Differential Mode = (OutP - OutN).
±(2% of |offset| + 10 mV); into 50 Ω to Gnd.
±25 mV; into 100 Ω differential.
±(2% of |offset| + 1% of amplitude + 20 mV).
± 88 mV; Into 100 Ω differential.
± 5 V at 150 mA.
± 5 V at 150 mA.
1 Ω
1 Ω
±(2% of bias + 20 mV); into an open circuit (zero load current).
±(2% of bias + 20 mV); into an open circuit (zero load current).
AWG5200 Series Technical Reference