Mc Server Status; Mc Server Button; Send Test Message Button - Adaptec Sensica UO Instructions For Use Manual

Sensica™ UO System for ICU Instructions for Use, Model No. SCCS-1001, ver. 1001

18.5 MC Server Status

Displays status of MC EHR software: Running, Stopped, Not Present.

18.6 MC Server Button

Touching the "MC Server" button will display the MC EHR software administration screen.

18.7 Send Test Message Button

Touching the "Send Text Message" will sends a test HL7 message through the system for
debugging.
Note: It is possible to transfer urine output data electronically from the Sensica™ UO System for
ICU to a facility's EHR system through middleware products, using the circular jack (for a serial port
cable assembly) located at back of the system base. (See Figure 5.) This requires additional
software. Please contact your Sensica™ UO System representative for more information.
P/N 005-0175 Rev A Adaptec Medical Devices 61