Sensica™ Uo Software/Icu: User Interface; Touch Screen Display; Figure 8: Move System Using Crossbar Handle; Figure 9: Sample Sensica™ Uo System For Icu Display Screen - Adaptec Sensica UO Instructions For Use Manual

Sensica™ UO System for ICU Instructions for Use, Model No. SCCS-1001, ver. 1001
To remove the bag for transporting the patient, turning the patient or any other reason, the drainage
tubing can be removed from the tube holder and the bag lifted off the ring. To resume UO
monitoring after removing the bag, the bag is hung on the ring and the tubing reinserted securely
into the tube holder, the tube band aligned with the tube holder. The system software will run a brief
system check to stabilize the recording. If the volume of urine has changed, the display software will
automatically update the total volume of urine in the bag.
Important: The Sensica UO System for ICU is not designed to be
transported with the patient. To move the system when needed,
pick it up using the crossbar handle at the back of the stand.
Do not lift from the monitor or the front of the system.
Crossbar Handle

Figure 8: Move system using crossbar handle

1.2 Sensica™ UO Software/ICU: User Interface

1.2.1 Touch Screen Display

The monitor display is touch screen operated. Figure 9 shows the Sensica UO Display for ICU in
normal operating conditions with "day" mode selected. The large number is a "live" amount,
updating continuously as urine collects in the bag. The numbers in the light green boxes to the left
of the current hour are UO measurement totals for previous hours, to show data trending. It is
possible to scroll further back in time using the arrow on the left-hand side of the screen.
Figure 9: Sample Sensica™ UO System for ICU display screen
P/N 005-0175 Rev A Adaptec Medical Devices 13