Sensica™ UO System for ICU Instructions for Use, Model No. SCCS-1001, ver. 1001
10.1.3 Table by Shift
The Table by Shift provides hourly UO measurement by shift. The shift change time and hours are
set by the administrator. (See Chapter 15.)
As with the Table by Date, the Table by Shift includes an AKI measurement column, which shows
the UO by ml/kg/hr. To populate this column, it is necessary to input the patient's weight. To input
the weight from this screen, touch the "AKI Patient Weight" button. This will bring up the Patient
Weight Entry Screen. (See Figure 20.)
The screen can be scrolled up and down using the arrows on the left-hand side of the screen.
Figure 42: Data Screen - Table by Shift Screen example
10.2 Snapshot Screen
The Sensica UO System for ICU software provides a simple way to see and communicate AKI
diagnostic data trends, using the most recent six hour UO recordings. The graphic information
is formatted so it can be photographed and sent via a cell phone as a text.
P/N 005-0175 Rev A
Adaptec Medical Devices
45