Operating Environment; Automatic Data Transmission To Ehr; Table 3. Sensica™ Uo System For Icu Operating Environment; Figure 16: Sensica™ Uo System For Icu Relay Software - Adaptec Sensica UO Instructions For Use Manual

Sensica™ UO System for ICU Instructions for Use, Model No. SCCS-1001, ver. 1001

1.3 Operating Environment

Table 2 displays information about the Sensica UO System for ICU operating environment.
Table 3. Sensica™ UO System for ICU Operating Environment
Specification / Classification
Electrical Specifications
Medical Electrical Classifications
Environmental Specification

1.4 Automatic Data Transmission to EHR

The built-in Sensica™ UO System for ICU Relay Software allows for automatic, wireless
transmission of urine output data to an electronic health records (EHR) system using a certified HL7
protocol with a standard WiFi connection. (Adaptec Technical Support is available to work with a
facility's IT staff to configure the data transmission for specific EHR software.
The Sensica UO System for ICU administrator will need to set up the communications link for
appropriate transmission of UO data to the EHR. (See Chapter 18.)
Figure 16: Sensica™ UO System for ICU Relay Software
Note: It is possible to transfer urine output data electronically from the Sensica™ UO System for
ICU to a facility's EHR system through middleware products, using the serial port connection
located at back of the system base. This requires additional software. Please contact your
Sensica™ UO System representative for more information.
P/N 005-0175 Rev A
Description
AC to DC Power Supply Medical Grade Class II Power
Supply (PMP15M-10-1-BPD):
AC Input - 100-240V ~0.5-0.3A, 50-60Hz
DC Output (input to device) - 6V, 2.5A Max (15W)
Product Safety Classification: CLASS II ME EQUIPMENT
Applied Part: TYPE BF
Operating Temperature Range: 15-30
Storage: 15-30
o
Transport: 5 C (at 85% Relative Humidity) to 60
30% Relative Humidity)
Adaptec Medical Devices
o
C (at 85% Relative Humidity)
o
C
o
C (at
18