Sensica™ Uo Patient Ring Kit: Sensica™ Uo Ring (Single Patient Use); Figure 4: Back View Of Sensica™ Uo System For Icu Stand Base; Figure 5: Sensica™ Uo Ring, Front And Back - Adaptec Sensica UO Instructions For Use Manual

Sensica™ UO System for ICU Instructions for Use, Model No. SCCS-1001, ver. 1001
Figure 4: Back view of Sensica™ UO System for ICU Stand base
The Sensica UO System for ICU is a DC-powered device that plugs into a medical grade wall
supply via a 19ft power-cord assembly, and sits on the floor at a convenient location near the foot
end of the patient's bedside. There are two built-in battery backups, one in the base of the system
and one in the monitor. Combined, the two batteries provide approximately twenty hours of use if
the system is unplugged for any reason. The system software will alert the user if the system is
unplugged and provide battery life information. Both batteries re-charge when the system is
plugged into wall power.
1.1.2 Sensica™ UO Patient Ring Kit: Sensica™ UO Ring (Single Patient Use)
The Sensica UO System for ICU is designed for precise measurement using the disposable,
Sensica™ UO Ring, which is a part of the Sensica™ UO Patient Ring Kit. Each time the system is
used with a new patient, a new Sensica UO Ring must be connected to the Sensica UO Stand. The
system software is designed to calibrate each time a new ring is attached to ensure accurate
calculations of urine output volume. Any standard urine collection bag can be hung on the ring.
Figure 5: Sensica™ UO Ring, front and back
P/N 005-0175 Rev A Adaptec Medical Devices 11