Sensica Uo System For Icu Hardware; Sensica™ Uo System For Icu Stand With Attached Monitor; Figure 2: Drainage Tubing Tethered To Sensica™ Uo Stand; Figure 3: Sensica™ Uo System For Icu Without Ring - Adaptec Sensica UO Instructions For Use Manual

Sensica™ UO System for ICU Instructions for Use, Model No. SCCS-1001, ver. 1001
The Sensica UO System for ICU is designed to sit on the floor at the patient's bedside. Any
standard indwelling catheter ("Foley"), drainage tubing, and collection bag may be used with
the system. The drainage tubing is tethered to the stand via the built-in tube holder to ensure
correct operation of the system. The collection bag is hung on the single patient use ring. Once the
bag is hung on the ring, the system begins recording urine output. See Section II, Sensica™ UO
System for ICU Instructions for Use.
Figure 2: Drainage tubing tethered to Sensica™ UO Stand

1.1 Sensica UO System for ICU Hardware

1.1.1 Sensica™ UO System for ICU Stand with Attached Monitor
The Sensica UO System for ICU features: (a) monitor display, (b) a stand with control unit, (c) a
disposable ring interface, and (d) built-in tube holder on left hand side of stand. The power switch
for the display is located on the top of the monitor.
a
b
c
d
Figure 3: Sensica™ UO System for ICU without ring
P/N 005-0175 Rev A Adaptec Medical Devices 10