Mounting Cutout; Figure 6: Mounting Cutout For Combivert P6 (Provided By Customer) - KEB COMBIVERT P6 Instruction Manual

Technical Data
3.3.1

Mounting cutout

*) Threaded bolt, press nut or drilling for a M6 screw
Figure 6:
Attention


22
M6 *)
Mounting cutout for COMBIVERT P6 (provided by customer)
Ensure correct material thickness
The material thickness of the rear of the cabinet must be choosen in a way,
that material does not deform. The degree of protection IP54 will complied
togehther with the rubber seal of the P6.
225
192
±1
75