Table of Contents
Advertisement
Preface
• digital inputs and outputs, relay output (potential-free), brake control and
- supply, KTY or PTC input, PT100 inputs, two encoder interfaces, field bus interface
(CAN open/ProfiBus)
1.7
Options
The pitch inverter can be equipped with the following options:
• Brake supply and control 24 V or 150...300 V
• Outout 24 V/4,2 A usable for customer components, if no 24V brake is connected
• Integrated heater resistor for cold-climate version and as condensation protection
• Braking resistor integrated at heat sink
• Fieldbus interface CANopen, ProfiBus, Interbus, PROFINET, POWERLINK, EtherCAT
• humidity sensor, mounting orientation sensor, analog inputs
• Position of the fans' rotational axes either in x, y or z-direction (according to the mounting
orientation)
10
- Quick Links:
- Fault Remedy
Hide quick links:
Advertisement
Table of Contents
