Site Preparation; Installing The Arc-Worldlite 50 Common Base; Figure 4-1 Area Needed For Installation - YASKAWA Motoman WorldLite-50 System Manual

INSTALLATION
4.2

Site Preparation

To prepare your site, proceed as follows:
1. Clear the floor space needed for the unit (see Figure 4-1).
NOTE: An additional 2.43 to 3.05 m (8 to 10 ft.) on all sides of is recommended.
2. Gather all customer-supplied items and required tools listed in Section 4.1.
4.3

Installing the Arc-WorldLite 50 Common Base

The Arc-WorldLite 50 is shipped completely assembled on a wooden shipping
skid. To install the Arc-WorldLite 50 common base, proceed as follows:
1. Unbolt Arc-WorldLite 50 common base from wooden shipping skid using a
3/4 -in. socket (see Figure 4-2).
WARNING!
The robot/positioner common base weighs 1724 kg (3800 lbs). Be
sure that your crane or forklift is capable of handling this much
weight or damage to the equipment or injury to personnel can result.
2. Using a
3. Place Arc-WorldLite 50 common base in position (see Figure 4-1).
4. Carefully remove protective plastic wrapping from all system components.
5. Inspect all system components, for shipping damage.
NOTE: If damage is found, notify shipper immediately.
Arc-WorldLite 50 System Manual
2000
(6.56 ft)

Figure 4-1 Area Needed for Installation

Arc-WorldLite 50 common base from the skid.
forklift, remove
4-2
1524
(5.00 ft)
XRC
2438
(8.00 ft)
MOTOMAN